© jkj,gwww.itda.ac.id 2022

Detail Skripsi

ANALISIS KONDUKTIVITAS TERMAL PADA ALUMINIUM, TEMBAGA, STAINLESS STEEL DAN PENGARUHNYA TERHADAP EVAPORATION TIME
Penulis
ANGGA SATRIA
Pembimbing : Teguh Wibowo, S.T., M.T., - Benedictus Mardwianta, S.T., M.T.,

ABSTRAK :
metals are tabulated. In this study, test on the thermal conductivity of commonly produced copper, aluminium and stainless steel were conducted. In addition, evaporation time of the same materials were tested. The purpose of this study was to investigate the K value and the effect of the evaporation time to the liquid (water). The study was conducted by heating the materials using iron plates as a heated heater using induction stove. The data obtained were in the form of temperature at the points of the data and also the heating time for testing thermal conductivity. Meanwhile, the evaporation time testing showed the duration of water evaporation time. The results showed that the highest K value was at the copper (392.7559J/msoC), and then the aluminum (206.6966J/msoC) and the lowest was the stainless steel (46.6289J/msoC). Meanwhile, the evaporation time test showed that the fastest evaporation time to the water was at the copper and then the aluminium and the slowest was at the stainless steel as noted that the evaporation has not entered into the film boiling phase. In condusion, the highest the K value the fastest the materials evaporate water


Tulisan Lengkap dapat Dibaca di Ruang Tesis/Disertasi
Penulis : ANGGA SATRIA
NIM : 12040029
Foto :
File : [ Baca file skripsi ]
   

E-LibSTTA

Sistem Informasi Perpustakaan STTA Yogyakarta

© E-LibSTTA 2022